AC DC Bridges Trivia Questions & FAQ

Home Electronics Engineering Analog Electronics AC DC Bridges

Professional AC DC Bridges FAQ Questions and Answers

Welcome to our comprehensive Trivia Quiz and interview preparation guide. Below you will find a curated list of popular Trivia Questions and Answers specifically for AC DC Bridges. Whether you are preparing for a technical interview or just testing your knowledge, these FAQ Questions will help you succeed.

What is a bridge?

A bridge circuit is a type of electrical circuit in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch connected between the first two branches at some intermediate point along them.

What can we measure by bridge?

The bridge circuit is useful in measuring impedances (resistors, capacitors, and inductors) and in converting signals from transducers to related voltage or current signals.

What is Null or balanced condition?

The bridge circuit is balanced when the output read by the meter is zero or minimum. In this condition the voltages on both sides of the meter are identical.

What is a DC Bridge?

A bridge circuit that is excited by DC source is known as DC Bridge.

What is an AC Bridge?

A bridge circuit that is excited by an AC source is known as an AC Bridge.

What is Resistance Measuring Bridge?

A resistance bridge (for AC or DC) would have four resistors and an ohmmeter. The value of two of the resistors is known precisely, and one of the resistors is variable with a clearly marked scale. The fourth resistor is the one being measured. If the variable resistor is turned until the meter reads zero, the value of the unknown resistor can be read off the scale.

What is Capacitance Measuring Bridges?

Capacitors are devices that are used with AC circuits but they do not work with DC circuits. Capacitors affect AC circuits by shifting the relationship between the voltage and current cycles. For a capacitance measuring bridge the setup is exactly the same as for a resistance bridge except at least one of the four components is capacitor.

What is Inductance Measuring Bridges?

Inductors are the devices that are used with AC circuits but they do not work with DC circuits. Inductors affect AC circuits by shifting the relationship between the voltage and current cycles. For an inductor measuring bridge the setup is exactly the same as for a resistance bridge except at least one of the four components is inductor. With inductor bridges you must take care that the inductors are physically separated because inductors work with magnetism and if they are physically close together the magnetic fields can interact.

Enlist some of AC Bridges?

There are numerous AC bridge circuits, the more widely known of which are as follows:
1) Resonance Bridge
2) Schering Bridge
3) Hay Bridge
4) Owen Bridge
5) Maxwell Bridge
6) Andersons Bridge
7) Wien Bridge

What we can measure by Resonance Bridge?

A Resonance Bridge is an AC bridge circuit used for measuring an unknown inductance, an unknown capacitance, or an unknown frequency, by balancing the loads of its four arms.

What we can measure by Schering Bridge?

A Schering Bridge is a bridge circuit used for measuring an unknown electrical capacitance and its dissipation factor.

What is dissipation factor of a capacitor?

The dissipation factor of a capacitor is the the ratio of its resistance to its capacitive reactance.

What we can measure by Hay Bridge?

A Hay Bridge is an AC bridge circuit used for measuring an unknown inductance by balancing the loads of its four arms, one of which contains the unknown inductance.

What we can measure by Owen Bridge?

An Owen Bridge is an AC bridge circuit used for measuring an unknown inductance by balancing the loads of its four arms, one of which contains the unknown inductance.

What we can measure by Maxwell Bridge?

A Maxwell Bridge, also known as the Maxwell-Wien Bridge, is an AC bridge circuit used for measuring an unknown inductance by balancing the loads of its four arms, one of which contains the unknown inductance.

What we can measure by Andersons Bridge?

In Andersons bridge, the self-inductance of an inductor is measured in terms of a standard capacitor.

What we can measure by Wien Bridge?

Wien Bridge in its basic form is designed to measure frequency by balancing the pots of its reactive arms. It can also be used for the measurement of an unknown capacitor by balancing the loads of its four arms with great accuracy.

Name two AC Bridges which are frequency independent?

The two AC Bridges which are frequency independent are:
1) Maxwell Bridge
2) Owen Bridge